How To Sew A Pillowcase With A Cuff
Match the trim and seam and pin. Lay your unfinished pillowcase on a flat surface, right side down.
Now fold the fabric face together and align the edge of pillow with the marks of line the cuff.
How to sew a pillowcase with a cuff. Cut list for each pillowcase: This will be where the ½” fold is under the 4” fold. If you are using cotton fabric, then your cuff seam should still be there from when you pressed down with the iron.
They can be made in a snap and they will use up a lot of your stash. Use your sewing machine or a needle and thread to stitch a straight seam around the remaining raw edges of the pillowcase. Cut out the cuff fabric into a piece that’s measuring 11 x 43 inches.
Your kids will love making their own pillowcases. Using a 3/8” seam allowance, sew along the raw edge. Sew down the one raw edge and along the bottom of the pillowcase with a 1/4″ seam and then trim the corner.
Lay the folded cuff next to the open end of the pillowcase. 6) fold the opposite side 1/4″ and iron 4) open the cuff and iron.
There are just a few supplies you’ll need to sew these burrito style pillow cases with a contrast cuff and trim. This pillowcase pattern with cuff sports a hidden little cuff inside that holds the pillow in place and doesnt let it scoot out when you're sleeping. ¾ yard main pillowcase fabric (27” x width of fabric from selvage to selvage) ¼ yard cuff fabric (9” x width of fabric from selvage to selvage) accent strip fabric (2” x width of fabric from selvage to selvage), pressed in half lengthwise to make a 1” folded strip
Place a pin where the seam of the cuff needs to be, so the width of the cuff matches the width of the pillowcase. Starting at those top folded cuff ends, and keeping your selvedge edges aligned, sew a seam down what is now the side of your pillowcase. Reverse the pillowcase so that the wrong sides are facing out.
Pin through all layers of fabric. See how the cuff wraps over the pillowcase body, like a burrito. Fold fabric in half wrong sides together and sew a 1/4 seam along the side and bottom.
These instructions are to do this with french seams. How to sew a pillowcase with a cuff Be careful not to catch the main fabric in the seam.
Putting wrong sides together, fold the fabric to form the shape of your pillowcase. Slip the folded cuff circle back over the open end of your pillowcase body, right sides together, sandwiching the flange between the layers and matching the raw edges. Leave the hemmed part of the pillowcase open.
The next step in how to sew a pillowcase is to stitch along the folded edge. You’ll want to stitch close to the folded edge, with between 1/8” and ¼” inseam. From main fabric, cut 1 piece that is 27″ x 40″ from coordinating fabric, cut 1 piece that is 9″ x 40″ from trim fabric, cut 1 piece that is 2″ x 40″ you’ll find the full pillowcase roll tutorial here.
Good luck with this project and have fun doing it. Fold the left side over the right side. Cut the cuff fabric into a 12 x 43 inches piece.
Press the cuff and trim on both sides. Sewing a french seam may sound intimidating, but it's pretty straight forward. Turn up the cuff fabric and pin it to the both sides of the pillowcase fabrics.
Lay the folded cuff next to the open end of the pillowcase. Line up the 27 inch raw edges. You have now completed the perfect colorful and fun pillowcase.
Finally, turn your pillowcase inside out and press along the seams you just sewed. For the standard size pillowcase, start by cutting out a rectangular piece 27″ x 43″ big, from the main fabric. Fold your pillowcase in half with wrong sides together, matching up the raw sides.
Grab your accent fabric and your cuff fabric and put them together with wrong sides together (the opposite of what you normally do). Sew along the basted edge using a 3/8 seam. How to stitch edges of pillowcase
If you don’t want to do the french seams then just do normal seams here. Fold the bottom edge of the cuff fabric up over the rolled main fabric and pin to basted edge. Even better, this is the perfect pillowcase tutorial if you're sewing with kids.
I was making the basic pillow case, and when you’re making the cuff for the opening, the instructions state to have the 41″ sides on the left and right, and to hem the top. Making a pillowcase is easy and fast so make as many as you want to brighten up your bedroom decor. First, mark the line of the cuff (its width is 28cm).
To add to the intrigue, and maybe add some confusion, there is also a special seam that attaches the cuff to the rest of the case. Lay the cuff out right side up. 5) sew a top stitch along the sewn seam on the right sides of the fabric 1/8″ seam is perfect for top stitching.
To enclose those raw edges, you'll need to sew a french seam. If you already are familiar with these construction techniques, skip the details and sew up some custom pillowcases. Take the bottom edge of the cuff fabric and wrap it over the rolled up pillowcase fabric.
I also mentioned this in the material listing: This creates the folded open cuff of the pillowcase. How to mark the line of the cuff.
Now, fold the piece in half, so that the “wrong sides” are facing each other. It mostly involves sewing straight lines, so it's great for beginners using the sewing machine for the first time. But this will make a pillowcase that is too long and narrow.
Try to make sure the seams of the cuff and trim are lined up. Place a pin where the seam of the cuff needs to be, so the width of the cuff matches the width of the pillowcase. Press your cuff and topstitch it along the sewn seam.
This seam requires the bulk of the pillowcase to be pulled through the small end opening of the cuff. So this pillowcase tutorial is for an easy pillowcase that fits my beloved pillow but the principle is quite the same, no matter the size. Align the cuff’s seam with one of the pillowcase body’s side seams and start pinning at this point, going around from one direction and then the other, meeting at the center pin point.
1) fold the cuff in half and iron to crease. For the king size pillowcase, cut out the main fabric into a piece measuring 31″ x 43″ in dimensions. Fold that cuff in 4″ and pin as needed.
Pull the main fabric roll out one end of the cuff and press. Fold back the cuff and carefully pull out the pillowcase body. Finally, give the cuff and trim a good press with your iron.
Now flip the pillowcase right side out. If you have stitched and cut the pieces accurately, the cuff and main case should be the same width, but i double check before i stitch the cuff. I like to use the burrito method when making pillow cases because they sew up really easily and they hide the seam where the cuff is sewn to the main fabric of the pillow case.
Fabric for main body (100% cotton. I think there’s a mistake in the tutorial though.